Welding robots are gradually replacing welders. Although welding robot is easy to use, because it is a machine, it will inevitably have some failures. Today we are going to take a look at common equipment failures and how to solve them.
1. Welding position or welding gun may cause welding deviation; Consider whether TCP is accurate first, and then adjust.
2. Edge biting may be caused by improper use of welding process parameters or incorrect welding gun Angle or position information; By adjusting the power, you can change the welding process parameters, you can adjust the attitude development of the welding gun and the relative important position of the welding gun and the workpiece.
3. The appearance of stomata may be detrimental to gas protection. If the primer is too thick or the protective gas is not dry enough, adjust accordingly.
4. Spatter may not be suitable for the selected welding parameters due to external gas composition or excessive welding wire elongation; The power can be adjusted to change the size of the welding parameters, and the proportion adjustment device can adjust the proportion of the gas mixture to adjust the relative position of the cutting torch and the workpiece.
5. After arc pit is formed, weld and end are cooled. Programming, in the working steps to increase the arc pit function, can be fully filled.
